What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 03.07.2025 02:10

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
The other is “what does a “fuse” do?”
so, what happens?
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
Now when you have a certain ac resistance, then a current flows in a loop.
Trump's tariffs are hammering the industry he wants to save - Politico
The third is lightning and “how it gets conducted into a home.”
but this device (an Inductor) … impedes the rapid changes in the current.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
How do you know if your husband loves you truly and deeply?
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This device then solves the entire problem.
Putin's uncompromising demands emerge after the latest round of Russia-Ukraine peace talks - AP News
There are three different concepts here that are getting confused.
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
This is the picture of an electronic coil of wire wound around a core of magnetic material.
Kroger Faces Backlash as Juneteenth Cakes Go Viral - Newser
Upvotes:
2024–10–14 [Omar Gharbi Omar Gharbi ]
He then asserts :
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
One is “what exactly is in a ‘surge protector’ ? ”
In schematic diagrams this is the symbol for a fuse:
For the first time, an external factor turns a male mammal into a female - EL PAÍS English
At least they know the answer if they wanted it.
But… the neutral is now “floating” because of the 1 ohm resistance.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Why are Americans obese? Is it the food or is it the psychology?
But it can get overloaded, and no longer works.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
What are some tips to stay young?
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
Edit 2024–10.
What does a fuse do?
First Sentence:
At one ohm, the resistor has a maximum of 1 watt power.
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–10–10[John johnson John Johnson ]
The bolt then partially travels down the line to your home.
A circuit breaker is similar, but is resettable.
nine
One
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
An AC voltage/ current source, and an ac inductive load.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
what exactly is a ‘surge’ protector?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
For this case there are devices called Metal oxide varistors (MOV).
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
Barnstars:
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
There are two important concepts here.
A fuse is a non-resetable over current circuit protector.
I post the exact comment here.
but I think this circuit , shows a few more pieces.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This is 'the assistant's answer'
He then describes the function of a fuse.
[image of Common-mode choke]
2024–10–16 [ OO OLAOYE OYEBODE ]
[old diagram got deleted by accident]
The MOV will conduct when the voltage exceeds 50% of line voltage.
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
This is where the MOV conducts again, and dissipated the energy.
What is lightning?
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This one hit behind the barn.
the problem then depends on "how fast does the fuse operate?".
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
It also is a device that limits the change in current flow.
a photo is worth a thousand words.
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
These devices are installed between the “hot” and “neutral” and protective ground.
So, the voltage could go up to 500 volts, and the fuse will not open up.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
These are simplified answers to the original question, and does not change anything I wrote above.
He then describes Rainy Season and Lightning.
It seems Mohan does not understand the difference between a comment and an Answer.
(Dc diagram shown, AC is similar).
Here is a simplified AC power diagram.
eight
This is where this question deviates from being a 'generic' question, and becomes more specific.